Best 10 Camera Mounts for Flexible Filming Setups in 2026

The best camera mounts depend on what you need to attach, where it needs to sit, and how much room you have to adjust the angle. These picks cover clamp-on support, cage and rig mounting, monitor positioning, and a tabletop stand, so match the mount to your gear and its attachment points.

Quick Top Products

Long Reach Clamp and Arm Kit

SMALLRIG 9.8 Inches Magic Arm Clamp Kit with 1/4" and 3/8" Threaded Holes

This kit pairs a 9.8-inch articulating arm with a super clamp, giving you more reach than a compact ballhead mount. The arm has 1/4-inch screws at both ends, while the clamp includes 1/4-inch and 3/8-inch threads for mounting options.

Double ball heads rotate 360 degrees, and rubber cushions help protect the clamped surfaces and accessories. It suits a camera setup that needs an adjustable accessory position, though its 15–54 mm clamp range and lack of corrosion resistance matter when choosing where to attach it.

Best For: Filmmakers who need an articulating arm for a monitor, light, or microphone on a rig or nearby surface.

Choose this kit when adjustable reach is more useful than a minimal mount: its arm extends 9.8 inches and works with a clamp opening from 15 to 54 mm. The rubber cushions also suit setups where protecting the contact surface matters.

Check the attachment point's size and the accessory's thread before buying. If your setup needs only a short direct connection to a cold shoe or cage, a smaller monitor mount may take less space.

Check Price on Amazon

Compact Clamp for Mixed Camera Gear

SmallRig Cool Ballhead Arm Super Camera Clamp Mount Double Ball Adapter, Fence Desk Table Mount for Ronin-M for Insta360, for Gopro - 1138

The SmallRig 1138 combines a super clamp with a double ball adapter and an action camera mount adapter. Its clamp can attach to a rod, tube, table, frame, or tripod, while a 1/4-inch-20 screw supports cameras, monitors, lights, microphones, and other gear.

The clamp's reinforced design supports up to 1.5 kg, and the body uses aluminum and stainless steel. It is a flexible general-purpose option for a fixed setup; for moving shots, attach the included safety rope as directed and keep the load within its stated capacity.

Best For: Creators who want one clamp mount for a desk, rod, tube, or frame and a range of small accessories.

Pick the 1138 if you want a compact clamp that can serve several kinds of camera accessories and mounting surfaces. The 1.5 kg capacity makes it suitable for modest payloads, and the included action camera adapter saves sourcing that piece separately.

Before buying, check the clamp's fit against your intended rod or surface and consider whether your camera or accessory needs a different connection. Its built-in ball adapter is convenient, while a longer magic arm offers more reach.

Check Price on Amazon

Anti-Twist Arm for Action Camera Rigs

SMALLRIG 11" Magic Arm Clamp with 1/4"-20 Screw & Retractable Pins

The SmallRig 5311 combines an 11-inch magic arm with a crab-shaped clamp. A 1/4-inch-20 screw and retractable pins help secure compatible monitors, lights, microphones, and action camera cages against twisting.

The clamp fits tubes, tables, tripod legs, and stabilizer rings from 15 to 40 mm, while its pads add grip and surface protection. Its maximum payload is 1.5 kg, so it suits smaller accessories rather than heavier camera builds.

The joints move together when loosened with the wingnut, then lock into position when tightened.

Best For: Vloggers and filmmakers who need an 11-inch clamp arm with retractable locating pins for supported accessories.

Choose the 5311 when you need an extended arm and anti-twist attachment for a supported cage, monitor, or action camera accessory. Its 15–40 mm clamp fit is useful for common poles, tripod legs, and tables, but check your mounting surface before ordering.

The 1.5 kg limit is the key tradeoff: it gives you positioning flexibility for smaller gear, while a heavier setup needs a mount with a documented higher capacity. Confirm that your device can use the 1/4-inch-20 connection and locating pins.

Check Price on Amazon

Shorter Arm for Tight Setups

SMALLRIG 7 Inches Magic Arm Clamp, with 1/4 Screw & Anti-Deflection Pin

The SmallRig 5310 uses the same general clamp-and-arm approach as longer options, in a 7-inch format for setups with less room. It has a 1/4-inch-20 screw and retractable pins for compatible accessories, with a knurled thumbscrew for tool-free fastening and an Allen wrench for added tightening.

The crab-shaped clamp fits tubes, tables, tripod legs, or stabilizer rings from 15 to 40 mm. Its maximum payload is 1.5 kg, so check both your accessory's weight and its mounting interface before use.

Best For: Creators who need a compact clamp arm for an action camera, light, microphone, or monitor.

This is the more compact fit among the supplied anti-twist clamp arms. Choose it when a 7-inch reach is enough and you want to keep a light or monitor close to the clamp.

The fitting range and 1.5 kg payload are practical checks before purchase, as is whether your accessory uses the supported screw and pins. If you need to position an accessory farther from a pole or table edge, a longer arm will give more reach at the cost of additional space.

Check Price on Amazon

Cold-Shoe Monitor Holder

SmallRig Field Monitor Mount Holder with Cold Shoe and 1/4" Inch Screw for 5 Inch and 7 Inch Monitor, with 360 Degree Swivel and 140 Degree Tilt, Rubber Cushion, Aluminum Alloy Build - BSE2346

The BSE2346 is a dedicated field-monitor holder with a cold shoe connection at the camera end and a 1/4-20 screw at the monitor end. It supports 5- and 7-inch monitors weighing up to 1.2 kg.

The holder swivels 360 degrees horizontally and tilts 140 degrees vertically, helping position a display for different shooting angles. Rubber cushions add friction and help protect the monitor, while the thumbscrews are designed for hand adjustment.

Check that your camera or rig has a compatible cold shoe and that the monitor stays within the capacity limit.

Best For: Camera operators mounting a 5- or 7-inch field monitor to a cold shoe.

Choose this holder when the monitor itself is the main item to position and your rig provides a cold shoe. It offers ample swivel and tilt adjustment for framing, with cushions at the monitor contact point.

Its stated fit is for 5- and 7-inch monitors up to 1.2 kg, so check your display's size and weight rather than assuming all field monitors will fit. For a mount that connects through ARRI locating points or a cage screw, consider a different interface.

Check Price on Amazon

ARRI Mount for Portrait or Landscape Monitors

SMALLRIG Adjustable Camera Monitor Mount with 3/8"-16 Locating Screw for ARRI, 360° Swivel and 180° Tilt, Anti-Twist 1/4" Locating Screw, Horizontal & Vertical Shooting

The SmallRig 6314 attaches a monitor to a camera cage, top handle, or other support through a 3/8-inch-16 ARRI locating screw. Its upper side uses a retractable 1/4-inch-20 locating screw and locating pins to resist twisting, with a silicone pad to protect the monitor.

The mount supports horizontal and vertical installations, and the head pans 360 degrees and tilts 180 degrees. A thumb-operated knob adjusts the tilt damping for devices of different weights.

Check the support's locating interface and your monitor's mounting hole before choosing this mount.

Best For: Video creators mounting a monitor to an ARRI locating point or 1/4-inch locating hole in either orientation.

Pick the 6314 if your rig has an ARRI locating point and you want to switch the display between landscape and portrait orientation. The anti-twist features and damping adjustment are useful when the monitor angle changes during a shoot.

The product notes do not give a maximum supported monitor weight, so verify that the mount is suitable for your particular display before relying on it. Check that your camera has a compatible ARRI locating hole for the mount.

Check Price on Amazon

ARRI-Style Mount for 5- and 7-Inch Displays

SmallRig Adjustable Camera Monitor Mount for ARRI-Style (Upgrade), 360° Swivel and 180° Tilt Monitor Holder Anti-Twist Support 5” and 7” Field Monitor

This adjustable mount supports 5- and 7-inch field monitors and attaches through an ARRI locating screw. Its top 1/4-inch-20 screw can also support a monitor, microphone, or light, and its bottom has 1/4-inch-20 threaded holes for a magic arm or stabilizer.

The holder swivels 360 degrees and tilts 180 degrees, with a knob for quick angle changes. The notes give different load capacities at different tilt positions, so check the supported load for your intended angle and display rather than treating one figure as universal.

Best For: Filmmakers needing a fast-adjusting ARRI-style monitor holder for a 5- or 7-inch field monitor.

Choose this mount for an ARRI-style connection when your display is a 5- or 7-inch field monitor and you want broad angle adjustment. Its quick knob is convenient for repositioning, while the documented load capacity changes with the tilt angle.

Check the capacity associated with your chosen position and the monitor's mounting interface. If you need portrait orientation called out explicitly, another SMALLRIG model describes horizontal and vertical installations; this model instead emphasizes its 180-degree tilt and 360-degree swivel.

Check Price on Amazon

Cold-Shoe Mount with Orientation Flexibility

SMALLRIG Camera Monitor Mount with Cold Shoe, 180° Tilt and 360° Swivel, Retractable 1/4" Locating Screw Anti-Twist, Damping Adjust, Horizontal & Vertical Shooting

The SmallRig 6313 slides into a cold or hot shoe and locks in place, offering a quick attachment point for compatible rigs. Its top has a retractable 1/4-inch-20 locating screw, locating pins, and silicone pad to help prevent monitor twisting and scratches.

The head tilts 180 degrees and pans 360 degrees, and the damping can be adjusted with a thumb-operated knob. It also supports horizontal and vertical installations.

Check your monitor's screw connection and the support device's shoe before buying, especially if you plan to use a magic arm through the bottom threaded hole.

Best For: Videographers who want a cold-shoe monitor mount that can be set for horizontal or vertical shooting.

Pick the 6313 when a shoe mount is the most convenient way to add monitor support and you want both portrait and landscape positioning. Its locking shoe base offers a different rig connection from an ARRI-style mount, while the top locating features address monitor twist.

The maximum supported monitor weight is not specified, so confirm suitability for your display before purchase. Also check whether your camera has a cold or hot shoe available and whether the monitor uses the supported 1/4-inch connection.

Check Price on Amazon

Tool-Free ARRI Monitor Positioning

SMALLRIG Monitor Mount EVF Holder Support with Locating Pins for ARRI Standard - 2174

The SmallRig 2174 attaches through a 3/8-inch threaded hole for ARRI standard on a compatible cage or handle. It supports 5- or 7-inch monitors up to 1.5 kg and rotates through an axis with up to 146 degrees of adjustment.

The thumbscrew tightens by hand for quick installation or release, and an Allen-wrench hole allows additional tightening. If a cage lacks ARRI locating holes, the notes identify an optional mini plate as an alternative interface.

Confirm your cage or handle connection and display weight before buying.

Best For: Operators who need a 5- or 7-inch monitor mounted to an ARRI locating hole and adjusted without tools.

Choose the 2174 if your rig has an ARRI locating hole and you value simple, hand-tightened monitor positioning. Its stated support for 5- and 7-inch displays up to 1.5 kg gives a clear size and weight check.

The 146-degree adjustment is less extensive than the full swivel and tilt ranges listed for some other monitor holders, so compare the movement you need with your framing setup. Check whether your cage has the required locating points or needs the optional mini plate.

Check Price on Amazon

15 mm Rod Clamp for Rig Expansion

SMALLRIG Super Lightweight 15mm Railblock, 15mm Rod Clamp with 1/4" Thread

This railblock is a rig component for attaching 15 mm rods to a plate, cage, or handle; it is not a standalone camera mount. The aluminum clamp has two 15 mm rod holes and 1/4-inch-20 mounting holes, with included short and long screws for securing it to a rig.

A spring ratchet wingnut tightens the rods and can be repositioned in tight spaces where a full turn is difficult. Choose it when your setup already uses 15 mm rods, and verify the spacing and attachment screws needed for your plate.

Best For: Camera rig builders adding accessories to a standard 15 mm rod system.

Pick this railblock only if you are building around 15 mm rods and need a compact attachment point for additional rig gear. It includes screws in two lengths and a ratcheting wingnut that helps when access is limited.

It does not provide a camera-facing mount on its own, so confirm that your rods, plate or cage, and accessories form a compatible assembly. For a direct clamp on a table or tube, one of the super clamp options is a better fit.

Check Price on Amazon

How to Choose Camera Mounts

How We Picked Camera Mounts

We prioritized products that directly attach a camera, monitor, light, microphone, or action-camera accessory to a rig, clamp point, or compatible shoe. The selection includes surface clamps and articulating arms for flexible positioning, dedicated monitor holders for on-camera viewing, and a rod clamp for builders using a 15 mm rig system.

We also considered whether each candidate's intended connection and supported load were clear enough to help buyers match it to their equipment. Camera-specific cages, power holders, handgrips, bundles, and wearable mounts serve narrower jobs or do not provide a general mounting point, so they were left out.

Comparing Camera Mounts by Attachment and Reach

The main choice is where the mount connects. Clamp arms such as the SmallRig 1138 and 5311 attach to tubes, tables, or rig elements; the 1138 includes a double ball adapter and action-camera mount, while the 5311 has locating pins and an 11-inch arm.

The 7-inch 5310 offers a shorter reach for tighter setups, and the 2732 kit's 9.8-inch arm uses a separate super clamp.

Monitor holders use different interfaces. The BSE2346 attaches through a cold shoe, the 6313 uses a cold or hot shoe, and the 6314, ARRI-style adjustable holder, and 2174 use locating or threaded points intended for compatible cages and handles.

The 942 railblock serves a separate purpose: it connects 15 mm rods to a rig rather than holding a display directly.

Choosing a Clamp or Magic Arm for Camera Gear

Check the mounting surface before ordering a clamp. The 5310 and 5311 fit 15 to 40 mm surfaces, while the 2732 opens from 15 to 54 mm and the 1138 provides mounting for rods, tubes, tables, frames, or tripods.

These ranges describe different clamp designs, so measure the actual rail or surface you plan to grip.

Then check payload and reach. The 1138 supports up to 1.5 kg, and both 5310 and 5311 list a 1.5 kg maximum payload.

A longer arm can place an accessory farther from the clamp, but it also takes up more room. Match the needed reach to the available space, and use a safety tether where the mount's instructions call for one.

Finding a Camera Monitor Mount That Fits Your Rig

Monitor size alone does not determine compatibility. The BSE2346 is described for 5- and 7-inch monitors and supports up to 1.2 kg; the 2174 supports those screen sizes up to 1.5 kg.

The ARRI-style adjustable holder also supports 5- and 7-inch displays but gives angle-dependent load figures, so compare the relevant position with your monitor's weight.

Look at the base connection and the screen-side attachment. A cold-shoe holder is convenient when your camera has a shoe available.

ARRI locating screws require a compatible locating point on a cage or handle, while a 1/4-inch-20 screw is common on monitors. The 6313 and 6314 offer both portrait and landscape installation, and their maximum supported monitor weights are not specified, so confirm they suit your display.

Who Should Buy Which Camera Mount

Choose the 2732 or 1138 for a versatile clamp-and-arm setup, with the 2732 providing a longer arm and the 1138 including an action camera adapter. Pick the 5310 when a shorter reach is useful or the 5311 when you need its 11-inch arm and locating pins.

For a small field monitor, choose by its weight and the mount interface your rig provides: cold shoe for the BSE2346 or 6313, and ARRI-style connection for the 6314 or 2174.

Rig builders who already use 15 mm rods can add the 942 railblock to connect rods to a cage, plate, or handle. Before buying any mount, verify the surface or thread it needs, the accessory's mounting point, and the load limit that applies to your planned position.